MQTT Broker
Configure your observers to feed mqtt.wcmesh.com. You can continue to feed LetsMesh and add mqtt.wcmesh.com as an additional broker.
There are multiple ways to connect:
WebSockets on port 443 + TLS + JWT (preferred)
This is LetsMesh compatibility mode. Substitute mqtt.wcmesh.com for mqtt-us-v1.letsmesh.net in your configuration.
If you want to continue feeding LetsMesh, add mqtt.wcmesh.com as an additional LetsMesh-compatible broker.
| Setting | Value |
|---|---|
| Host | mqtt.wcmesh.com |
| Port | 443 |
| Protocol | WebSockets + TLS + JWT |
| Audience | mqtt.wcmesh.com |
Secure MQTT on port 8883
| Setting | Value |
|---|---|
| Host | mqtts://mqtt.wcmesh.com:8883 |
| Username | wcmesh |
| Password | meshcoast |
Secure WebSockets on port 2883
| Setting | Value |
|---|---|
| Host | wss://mqtt.wcmesh.com:2883 |
| Username | wcmesh |
| Password | meshcoast |
Write-only broker
mqtt.wcmesh.com is a write-only broker. Observers can publish to it, but you cannot subscribe for your own applications.
If you need MQTT data for your own apps, contact us for read access on mqtt2.wcmesh.com.