Radio Settings
| Region | Frequency | Bandwidth | Spreading Factor | Coding Rate* |
|---|---|---|---|---|
| SoCal | 927.875 | 62.5 | 7 | 5 |
| Bay Area (default) | 910.525 | 62.5 | 7 | 5 |
| Sacramento-Foothills | 909.875 | 62.5 | 9 | 5 |
| Central Valley (default) | 910.525 | 62.5 | 7 | 5 |
| Central Coast (default) | 910.525 | 62.5 | 7 | 5 |
| Pacific Northwest (default) | 910.525 | 62.5 | 7 | 5 |
*Coding Rate is per device specific. You can be on a different coding rate and still reach the mesh. Every other parameter has to match.
Below are recommended settings to set on repeaters:
| Command | Description |
|---|---|
set path.hash.mode 1 | Sets the repeater to 2 byte mode |
set txdelay 1.6 | Sets a delay for repeating a flood packet. Checkout the whitepaper |
set direct.txdelay 0.8 | Sets a delay for direct packets |
set loop.detect moderate | Tells repeater to look for its ID in the path before forwarding packet |
set flood.advert.interval 47 | Sets advert interval to 47h. Higher the better |
set advert.interval 0 | Turns off direct adverts |